Standard Flush Door - Regency P36E-NG4 Owners & Installation Manual

The standard fl ush door comes with a black frame. To install the frame,
simply hook the top door fl ange onto the top of the unit and swing the
door towards the unit, see Diagram 1.
P36E-4 Zero Clearance Direct Vent Gas Fireplace

STANDARD FLUSH DOOR

Diagram 1
Be careful that the glass gasket does not roll up; there must be a gap
between the gasket and the door lip to ensure that the door sits securely
on the unit, see Diagram 2.
Diagram 2
Use the hook to pull the spring out until you can put the hook into the
slot on the bottom door bracket. Repeat for 2nd spring. See Diagram 3.
Diagram 3
To remove the fl ush door, reverse the above steps.
INSTALLATION
41