Standard Flush Door - Regency P36D-NG2 Owners & Installation

02-51
Do not block the burner holes in this
area adjacent to the Log 02-54
11) Test fi re to ensure proper light off (make
sure fl ame fl ows smoothly from one end of
burner to the other). If there is any fl ame
hesitation, check that area for any blockage
of the burner ports.
12) Install fl ush glass and bay glass (if used)
as per instructions in this manual.
The standard fl ush door comes with a black
frame. To install the frame, simply hook the top
door fl ange onto the top of the unit and swing
the door towards the unit, diagram 1.
Diagram 1
®
Regency P36D Gas Log Fireplace
02-54
02-50

STANDARD FLUSH DOOR

Be careful that the glass gasket does not roll up;
there must be a gap between the gasket and
the door lip to ensure that the door sits securely
on the unit. Diagram 2.
02-75
02-55
Diagram 2
INSTALLATION
02-54
02-51
Use the hook to pull the spring out until you can
put the hook into the slot on the bottom door
bracket. Repeat for 2nd spring. See diagram 3.
Diagram 3
To remove the fl ush door, reverse the above
steps.
23