Pager Call; Storing A Pager Number - Panasonic KX-TC1741B Manual

Pager Call
This feature allows you to alert your pager when the unit records an
incoming message or receives a Caller ID call (p. 64). You can retrieve the
message from a touch tone telephone (p, 66). If you subscribe to a Caller ID
service, the caller's telephone number will be displayed on your pager. First
program the following settings (p. 60-64), then set the unit to call the pager.
The TALK and DIGITAL SP-PHONE Indicator lights must be off before
programming.
Storing a Pager Number
If you use a 1-800 pager number,see the next page for the storingprocedure,
Press _.
• The TALK indicator flashes.
Press P_AYBACK).
• "P" is displayed on the base unit.
3
Press {_}.
• "-" is displayed on the base unit.
4
Enter your pager number, and
press {REDIAL/PAUSEJ twice.*
Enter the access code, it required
by your pager company, and press
IREDIAL/PAUSE}twice again.*
TALK
5 Press_.
• A long beep sounds.
• The entered number is displayed
on the base unit.
• If you misdial, press IPROGRAM_ {REDIAIJPAUSEJ-
and start again from step 1. (
• You can enter a total of 44 digits. .
c
6O
• If the line has rotary or pulse service, press [_ between the pager
number and {REDIAL/PAUSEIin step 4.