Selecting The Ringer Volume - Panasonic KX-TG2680N Operating Instructions Manual

Programmable Functions

Selecting the Ringer Volume

With the handset
You can set the handset ringer volume to HIGH, LOW or OFF. If set to
OFF, the handset will not ring, and a caller's name will not be announced
with the handset even if the Talking Caller ID feature is ON (p. 17).
Your phone comes from the factory set to HIGH.
Make sure the unit is in the standby mode initially.
1 Press
(FUNCTION/CH)
2 Press
Ö
arrow points to "Ringer volume".
Press
3
á
4 Press
Ö
desired volume.
•The selected volume is displayed and
rings.
•To turn the ringer OFF, press and
hold Ö until 2 beeps sound.
To turn the ringer ON, press
•The ringer will sound at the LOW level.
•You can also select the ringer volume while a call is being received. Press Ö or
Ñ while the unit is just ringing. If you adjust the ringer volume while the unit is
announcing a caller's name (Talking Caller ID feature, p. 17, 34), the ringer
volume will not be changed but the speaker volume will be changed.
•When set to OFF, "Ringer off" will flash for about 45 seconds before the
handset returns to the standby mode.
•When you replace the battery, the selected ringer volume setting will return to the
factory set (HIGH). Reprogram if necessary.
18
.
or repeatedly until the
Ñ
(Yes key).
or to select the
Ñ
HIGH
or in step 4.
Ñ Ö
Save directory
H
Ringer volume
GF
Ringer
Low
GF
Ö
Ringer
LOW
Low
GF
Ö
OFF
Ringer off
H
=Yes
High
Ñ
High
Ñ