How To Operate From A Remote Phone; Setting The Remote Code - Panasonic AUTO-LOGIC EASA-PHONE KX-T1450BA Operating Instructions Manual

How to Operate from a Remote Phone
On the following pages, we will explain following features;
■ Playing Back Messages
■ Playing Back Newly-Recorded Messages
(Memory Playback)
■ Rewinding/Fast Forwarding the ICM Tape
while Listening to the Messages
■ Recording a Marker Message
■ Resetting the ICM Tape for Future
Messages
■ Monitoring Room Sound
■ Re-recording the Outgoing Message
■ Skipping OGM for ICM Recording
■ Setting/Cancelling the Answer Mode V_y
Setting the Remote Code
To get remote access, you must set and remember your remote code number.
The REMOTE CODE number is made up of 2 digits, the first digit is factory preset, and
the second digit is selectable. ("2" or "8")
REMOTE CODE
n
2 8
selectable
Factory preset number that is shown on the label
next to the code switch. This is the first digit of your
Remote Code number.
Example:
If the factory preset number is "4", then your code number could be either "42"
or "48" depending on the position of the REMOTE code switch.
Quick Reference Card for remote operation can be found on page 20.
Detach the Card from the Operating Instructions and use it for your convenience.
-13-