Communication Settings; Editing Communication Settings; Delete Device; Options - Kyocera TASKalfa 8000i User Manual

7

Communication Settings

Editing Communication Settings

1
2
3
4
5

Delete Device

Options

File Management Utility
Click Search. The application adds any specified printing systems to the main
list.
Communication settings specify the Login user name and Password used
with the device. Either local authentication or settings specified on the device
can be used.
In the main screen, select a printing system in the device list.
Click Communication settings.
Enter the Login user name and Password.
For Change authenticate mode, select Use local authentication or Use
settings on the device.
Click OK.
Removes the selected device from the main list.
To delete a device from the device list, select the device and click Delete
device.
Use this dialog to set several parameters that control how the FMU operates.
Launch automatically
The File Management Utility can be configured to start automatically and run
as a resident application when the computer is started. Select Launch
automatically to enable this feature. If the receiving folder or error folder
have not been specified or cannot be found, then the application will not
monitor or distribute files.
Folder for deleted files
Select Keep deleted files to save deleted files in this folder. Select
Maximum folder size and specify the size if needed. Click Remove deleted
files to erase all deleted files.
Clear history
Click Clear history to clear the job log.
Error folder path
FMU requires a local error folder for any files that it fails to distribute. A
network folder cannot be used as the error folder. Set the path to this by
clicking Browse. Alternatively, type the path into the box.
File Management Utility
1-2