Advanced Virtual Mailbox Options; Adding A New Virtual Mailbox - Kyocera FS-1035MFP/DP User Manual

Device

Advanced Virtual Mailbox Options

Selecting Advanced Virtual Mailbox Options
1
2
3
4
5
6

Adding a New Virtual Mailbox

1
2
3
3-16
You can change the following virtual mailbox settings if you have administrator
privileges:
Maximum VMB size
A numerical value, varying by model, can be set from 0 to 9999 MB. Select
"0" to prevent use of the virtual mailbox.
Change master password
A numerical value can be set from 1 to 65535, or the password can be
removed. An administrator can use the master password to override or
change virtual mailbox passwords.
Delete all virtual mailboxes
Erases all virtual mailbox data from the hard disk.
You can change selected virtual mailbox options.
Select a device.
Select Device > Virtual mailboxes.
In the Virtual Mailboxes dialog box, click Advanced. If a password has been
set, enter the password and click OK.
Select the desired settings:
Maximum VMB size
Enter a value for virtual mailbox size, or click the up or down arrow buttons to
select the value.
Change master password
Click Password, then enter the old and new passwords, and reenter the new
password. To remove the password, leave the New password and Confirm
new password boxes blank.
Delete all virtual mailboxes
Click Delete all, then click Yes to confirm.
Click OK in the Advanced dialog box.
Click Close in the Virtual Mailbox dialog box.
You can create a new virtual mailbox on the hard disk. A maximum of 255 virtual
mailboxes is supported.
Select a device.
Select Device > Virtual mailboxes.
In the Virtual Mailboxes dialog box, click New mailbox.
User Guide