Using The Showhardconf Command - Fujitsu SPARC Enterprise M3000 Service Manual

E.4

Using the showhardconf Command

This section describes the showhardconf command on the DC power supply
model.
Note – This is equivalent to
page
unit)" on page 4-8
page
this appendix.
On the DC power supply model, the showhardconf command output for the CPU
and the power supply unit section is as shown in the example below.
+ CPU Status:Normal;
+ Freq:2.750 GHz; Type:32;
+ Core:4; Strand:2;
PSU#0 Status:Normal; Serial:EA09320015;
+ FRU-Part-Number:CA01022-0730 01A
+ Power_Status:Off;
+ Type:DC;
PSU#1 Status:Normal; Serial:EA09320016;
+ FRU-Part-Number:CA01022-0730 01A
+ Power_Status:Off;
+ Type:DC;
For details, see the showhardconf command man pages.
E-6 SPARC Enterprise M3000 Server Service Manual • March 2012
3-11, Section 4.4.1, "FRU Removal and Replacement (Power supply unit/Fan
and Section 4.5.4, "Verifying the Hardware Operation" on
4-15. When using the DC power supply model, refer to the content described in
.
.
Section 3.5.1, "Using the showhardconf Command" on
/300-2278-01
/300-2278-01
;
;