Signal Cable; D.2 Signal Cable - Fujitsu SPARC Enterprise M3000 Service Manual

FIGURE D-1
UPC Port Locations
FIGURE D-1
Rear view
Note – The UPC port is supported only in the AC power supply model.
D.2

Signal Cable

Use the shielded pair cable with the following specifications.
Direct current resistance (roundtrip/pair): 400 W/km or less
■
Cable length: Up to 10 m (33 ft.)
■
D-2 SPARC Enterprise M3000 Server Service Manual • March 2012
shows the location of the UPC port on the M3000 server.
UPC1 port
UPC0 port