Verifying The Hardware Operation (Hard Disk Drive) - Fujitsu SPARC Enterprise M3000 Service Manual

The showhardconf output continued:
OPNL Status:Normal; Ver:0101h; Serial:PP082202R8
+ FRU-Part-Number:CA07082-D911 A1
PSU#0 Status:Normal; Serial:EA08210127;
+ FRU-Part-Number:CA01022-0720 02B
+ Power_Status:On;
+ Type:AC;
PSU#1 Status:Normal; Serial:EA08210131;
+ FRU-Part-Number:CA01022-0720 02B
+ Power_Status:On;
+ Type:AC;
FANBP_B Status:Normal; Ver:0101h; Serial:PP0821031E
+ FRU-Part-Number:CA20399-B12X 004AA/541-3304-01
FAN_A#0 Status:Normal;
FAN_A#1 Status:Normal;
XSCF>
For details, see the manual pages of showhardconf.
2. Confirm the state of the status LEDs of the FRU.
For information on the LED status, see
4.4.3 Verifying the Hardware Operation (Hard disk
drive)
●
Type the probe-scsi-all command to confirm that the new hard disk drive
has been installed.
;
/541-3306-01
/300-2193-02 ;
/300-2193-02 ;
;
and
TABLE 2-3 TABLE 2-5
Chapter 4 FRU Replacement Preparation
;
;
.
4-11