Removing The Fan Backplane - Fujitsu SPARC Enterprise M3000 Service Manual

14.2

Removing the Fan Backplane

1. Remove the signal cable for the operator panel (1 in
The cable is on the right side of the fan backplane.
2. Remove the signal cable connector for the motherboard unit (2 in
The cable connector is on the rear side of the fan backplane.
3. Remove the four screws securing the fan backplane (3 in
Removing the Fan Backplane
FIGURE 14-3
4. Remove the fan backplane from the server, and place it on a conductive mat.
3
3
A part
3
3
1
2
A part
Chapter 14 Fan Backplane Replacement
).
FIGURE 14-3
FIGURE 14-3
).
FIGURE 14-3
).
14-5