5. Loosen the two screws to remove the hard disk drive backplane.
Removing the Hard Disk Drive Backplane
FIGURE 10-3
6. Place the hard disk drive backplane on a conductive mat.
10.3
Mounting the Hard Disk Drive
Backplane
1. Mount the hard disk drive backplane.
2. Tighten the two screws to secure the hard disk drive backplane.
3. Secure the two cables to the rear of the hard disk drive backplane.
Caution – Do not forcibly mount the hard disk drive in a slot. Forcibly pushing the
component in a slot may damage the component or the server.
Chapter 10
Replacing the Hard Disk Drive Backplane
10-5