Fujitsu SPARC Enterprise M3000 Service Manual page 6

3.2
3.3
3.4
3.5
3.6
vi SPARC Enterprise M3000 Server Service Manual • March 2012
Failure Diagnostic Method 3-2
Checking the Server and System Configuration 3-4
3.3.1 Checking the Hardware Configuration and FRU Status 3-4
3.3.1.1 Checking the Hardware Configuration. 3-5
3.3.2 Checking the Software and Firmware Configurations 3-6
3.3.2.1 Checking the Software Configuration 3-7
3.3.2.2 Checking the Firmware Configuration 3-7
3.3.2.3 Downloading Error Log Information 3-7
Error Conditions 3-8
3.4.1 Predictive Self-Healing Tools 3-8
3.4.2 Monitoring Output 3-10
3.4.3 Messaging Output 3-10
Using Troubleshooting Commands 3-11
3.5.1 Using the showhardconf Command 3-11
3.5.2 Using the showlogs Command 3-14
3.5.3 Using the showstatus Command 3-15
3.5.4 Using the fmdump Command 3-16
3.5.4.1 fmdump -V Command 3-16
3.5.4.2 fmdump -e Command 3-17
3.5.5 Using the fmadm Command 3-17
3.5.5.1 Using the fmadm faulty Command 3-17
3.5.5.2 fmadm repair Command 3-18
3.5.5.3 fmadm config Command 3-18
3.5.6 Using the fmstat Command 3-19
General Oracle Solaris Troubleshooting Commands 3-19
3.6.1 Using the iostat Command 3-20
3.6.1.1 Options 3-20
3.6.2 Using the prtdiag Command 3-21