Fujitsu SPARC Enterprise M3000 Service Manual page 30

State Display by Combination of LEDs on the Operator Panel
TABLE 2-4
Name
*
POWER XSCF STANDBY
XSCF
Off Off
Off Off
Off Blinking
Off Blinking
Off On
On On
Blinking On
* READY LED is referred to when the XSCF unit status is indicated.
2-10 SPARC Enterprise M3000 Server Service Manual • March 2012
Description
CHECK
Off Power is not being supplied.
On Power has been turned on.
Off The XSCF unit is being initialized.
On An error occurred in the XSCF unit.
Off The XSCF unit is in the standby state.
The server is waiting for power-on of the air
conditioning facilities in the data center.
Off Warm-up standby processing is in progress (power is
turned on after the end of processing).
The power-on sequence is in progress.
The server is in operation.
Off The power-off sequence is in progress.
(The fan units are stopped after the end of processing.)