Mounting The Motherboard Unit - Fujitsu SPARC Enterprise M3000 Service Manual

Hide thumbs Also See for SPARC Enterprise M3000:
Table of Contents

Advertisement

2. Hold the two opaque handles on both sides of the motherboard unit and lift
the motherboard unit while sliding it out.
Removing the Motherboard Unit
FIGURE 6-5
3. Remove the motherboard unit from the server, and place it on a conductive
mat.
When removing the motherboard unit from the server, take care not to damage
the connector.
4. Remove the DIMMs.
For details, see
6.3

Mounting the Motherboard Unit

1. Mount the DIMMs.
For details, see
6-8
SPARC Enterprise M3000 Server Service Manual • March 2012
Section 7.3, "Removing the DIMMs" on page
Section 7.4, "Installing the DIMMs" on page
Handles
7-8.
7-9.

Advertisement

Table of Contents
loading

Table of Contents