Fujitsu SPARC Enterprise M3000 Service Manual page 132

2. Remove the two cables from the rear of the hard disk drive backplane (2 in
FIGURE 10-2
Removing the Cables of the Hard Disk Drive Backplane
FIGURE 10-2
3. Remove the cables connected to the CD-RW/DVD-RW drive unit.
For details, see
page
4. Pull the CD-RW/DVD-RW drive unit out by several centimeters.
For details, see
page
10-4 SPARC Enterprise M3000 Server Service Manual • March 2012
).
2
2
Section 11.3, "Removing the CD-RW/DVD-RW Drive Unit" on
11-5.
Section 11.3, "Removing the CD-RW/DVD-RW Drive Unit" on
11-5.
1
1