Table of Contents
Advertisement
Front Panel Information
The areas around the main port display provide the following device information:
IP
The IP address assigned to the MicroMMAC-T appears in the title bar of the
Chassis View window; this field will display the IP address you have used to
create the MicroMMAC-T icon. IP addresses are assigned via Local Management.
Connection Status
This color-coded area indicates the current state of the MicroMMAC-T in
communicating with the NetSight Element Manager.
•
•
•
•
UpTime
The amount of time, in a day(s) hh:mm:ss format, that the MicroMMAC-T has
been running since the last start-up.
Port Status
If management for your device supports a variable port display (detailed in
Status Displays, page
only a single port display is available, or if the default view is in effect, this field
will state Default.
MAC
The physical layer address associated with the IP address used to define the
MicroMMAC-T icon. MAC addresses are hard-coded in the device, and are not
configurable via NetSight Element Manager. The device's MAC address may be
altered using local management; if so, the locally administered MAC address will
appear in this field.
Boot Prom
The revision of BOOT PROM installed in the MicroMMAC-T.
Firmware
The revision of device firmware stored in the MicroMMAC-T's FLASH PROMs.
Viewing Chassis Information
Green indicates it is responding to device polls (valid connection).
Magenta indicates it is in a temporary stand-by mode while it responds to a
physical change in the hub; note that port menus are inactive during this
stand-by state.
Blue indicates an unknown contact status – polling has not yet been
established with the MicroMMAC-T.
Red indicates it is not responding to device polls (device is off line, or device
polling has failed across the network for some other reason).
2-9), this field will show the display currently in effect. If
The MicroMMAC-T Chassis View
Port
2-3
Advertisement
Table of Contents
