Port Level Statistics; Accessing The Station Port Menu; The Station Statistics Window - Enterasys MicroMMAC-T User Manual

Port Level Statistics

Through the Station Port pull-down menu, you can view statistics for a station
inserted into a ring, and graphically monitor the selected station via Timer
Statistics and the Performance Graph. The following sections detail how to access
the Station Port pull-down menu, and how to use the menu to view numerical
and graphical statistics for a station port.

Accessing the Station Port Menu

To access a Station Port menu:
In the Chassis View window, click on any inserted station port (i.e.
MicroMMAC-T port display.
The Station Port menu will appear, offering the following statistics selections:
•
•
•
3. Click the mouse to highlight your selection. The associated window will
Each window is described in the following three sections.

The Station Statistics Window

The Station Statistics window
configure the station port, and view performance and error statistics for the
selected port.
By using the radio buttons located at the right of the Station Statistics window,
you can choose whether to view the statistics gathered since the station was first
inserted (Total), counted during the last polling interval (Delta), or accumulated
from zero at a user-defined point (Cumulative). See
Cumulative Counts,page
Set the time interval to update information (from 1 second to 23 hours, 59
minutes, 59 seconds) by using the clock symbol at the bottom of the window. See
Setting the Statistics Poll
Port Level Statistics
Statistics...
Timer Statistics...
Performance Graph...
appear.
(Figure 3-11) contains fields which allow you to
3-1, for details.
Interval, page 3-3, for details.
Token Ring Statistics
) on the
Setting Total, Delta, or
3-19