Network Performance Graph Statistics; Configuring The Network Performance Graph - Enterasys MicroMMAC-T User Manual

Network Performance Graph Statistics

The Network Performance Graph contains the following statistics:
Network Events (Red)
Total Errors
Ring Purges
Beacon States
Nothing
Traffic (Blue)
Frames
Percent Load
Nothing

Configuring the Network Performance Graph

1. Using the mouse, click on the Network Events button (with the red square
2. Click on the desired mode (Total Errors, Ring Purges, Beacon States, or
3. Click on the Traffic button (with the blue square marker to its left). The Traffic
4. Click on the desired mode (Frames, Percent Load, or Nothing). The mode
The Performance Graph will now monitor the network using the user-defined
modes. (Click on Cancel to stop monitoring and exit the screen.)
Network Level Statistics
The total number of soft errors of any kind processed by
the network.
The total number of times the ring's active monitor has
issued a ring purge command.
The number of beacon states on the ring which have been
corrected by the automatic beacon recovery process
(ABRP).
The Network Events scale is not currently measuring any
network events statistics coming through the network.
The total number of good frames transmitted and
received by the network.
Reflects the load generated by the network compared to
its theoretical maximum load (4 or 16 Mbits/sec).
The Traffic scale is not currently measuring the traffic or
load processed by the network.
marker to its left). The Network Events pull-down menu will appear.
Nothing). The mode you have chosen will appear in the button. The
Performance Graph will refresh and begin to measure, using the new mode.
pull-down menu will appear.
you have chosen will appear in the button. The Performance Graph will
refresh and begin to measure, using the new mode.
Token Ring Statistics
3-11