Table of Contents
Advertisement
The FN100 Chassis View
Viewing Chassis Information
The FN100 Chassis View window
of the FN100, including a color-coded port display which immediately informs
you of the current configuration and status of the switch and its ports.
By clicking in designated areas of the chassis graphical display (as detailed later
in this chapter), or by using the menu bar at the top of the Chassis View window,
you can access all of the menus that lead to more detailed device- and port- level
windows.
When you move the mouse cursor over a management "hot spot" the cursor icon will
change into a "hand"
TIP
management option.
Front Panel Information
The areas above and below the main port display area provide the following
device information:
IP
The Internet Protocol address assigned to the FN100 appears in the title bar of the
Chassis View window; this field will display the IP address you have used to
create the FN100 icon. IP addresses are assigned via Local Management.
Connection Status
This color-coded area indicates the current state of communication between
NetSight Element Manager and the FN100.
2-2
Figure 2-1. FN100 Chassis View Window
to indicate that clicking in the current location will bring up a
(Figure
2-1) provides a graphic representation
On an 8-port FN100, the
network management
port is represented as
port 9. On a 16-port
FN100, the network
management port will be
represented as port 17.
Viewing Chassis Information
Advertisement
Table of Contents
