Table of Contents
Advertisement
Setting Station-Level Alarm Limits
To set an alarm for an individual station on the ring:
1. Place the text cursor into the desired alarm event field, and type in the
2. To enable an alarm, click on the checkbox next to the desired alarm event
3. Click on the clock icon next to the Within: field. A New Alarm Timebase text
The time interval set using the New Alarm Timebase textbox will apply to all alarms set
in the Station Alarm Limits window. The timebase needs only to be set once to apply to all
NOTE
alarms for the station. You do not need to set the timebase for each separate alarm.
4. Highlight the hour, minute, or second field, and type the desired interval in
5. Click on OK to enable all selected alarms for the station.
Station-Level Alarm Limits
Figure 4-2. The Station Alarm Limits Window
threshold value.
field. An X in the checkbox indicates that the alarm is enabled.
box will appear. In this text box, you enter the time interval for the specified
number of events to occur before the alarm is activated.
each (or click the cursor in the desired field, and click on the appropriate arrow
to scroll the interval up or down). Note that the minimum possible time interval
is 10 seconds. Any lower time interval entered will default back to the last
acceptable time entered. Click on OK to return to the Alarm Limits window.
Click on Reset Defaults to restore the default alarm thresholds.
Token Ring Alarms
4-7
Advertisement
Table of Contents
