The MicroMMAC-T Chassis View
Management Station Configuration
Selecting Configuration... from the Device menu will invoke the TR Management
Station Configuration window, where you can configure the module's onboard
management station.
Accessing the TR Management Station Configuration Window
To access the TR Management Station Configuration window from the Chassis
View window.
1. Click on the Device menu selection on the menu bar at the top of the chassis
2. Click to highlight the Configuration... selection. The TR Management Station
The TR Management Station Configuration window
specify the ring functions that the on-board MicroMMAC-T management station
will perform for its associated ring: it allows you to enable or disable automated
beacon recovery, and allows you to inhibit the station's ability to become the
active monitor. You can also specify the management station name and physical
drop number (location), and the delay time between the recording and the
reporting of an error.
The upper left corner of the window contains the MicroMMAC-T name, location,
Physical (MAC) and IP addresses, and uptime.
Figure 2-6. The TR Management Station Configuration Window
2-14
manager window. The Device menu will appear.
Configuration window will appear.
(Figure
2-6) allows you to
Managing the Hub