Handset Volume (Mfc-685Cw Only); Choosing The Handset Volume (For Volume Amplify) (Mfc-685Cw Only) - Brother MFC-685CW User Manual

Chapter 3
Handset Volume
(MFC-685CW only)
a
Press Menu.
b
Press a or b to choose
General Setup.
Press OK.
c
Press a or b to choose Volume.
Press OK.
d
Press a or b to choose Handset.
e
Press d or c to choose Low or High.
Press OK.
f
Press Stop/Exit.
Note
• You can adjust the handset volume any
time you are talking on the telephone.
There are two handset volume levels, Low
and High. The default setting is Low.
• Press d or c
level. The LCD shows the setting you are
choosing. The new setting will remain until
you change it again.
Choosing the Handset
Volume (For Volume Amplify)
(MFC-685CW only)
Before you begin to use the machine, you
must decide if you need to set the handset
volume to Volume Amplify: On for a user
who is hearing-impaired. The AMPLIFY
volume level complies with FCC standards.
Volume Amplify: Off
This default setting is appropriate if none of
the users are hearing-impaired. During a
conversation, users can press
the control panel to adjust the volume to Low
or High. When the handset is replaced, the
handset volume will remain until you change
it again.
26
to adjust the volume
d or c on
Volume Amplify: On -
Temporary
3
This setting is appropriate if some of the
users are hearing-impaired. During a
conversation, users can press
the control panel to adjust the volume to Low,
High or Amplify. When the handset is
replaced, the handset volume returns to the
default setting of Low.
Volume Amplify: On -
Permanent
Choose Volume Amplify: On -Permanent
if all of the users are hearing-impaired. During
a conversation, users can press
on the control panel to adjust the volume to
Low, High or Amplify. When the handset is
replaced, the handset volume returns to the
default setting of Amplify.
Note
When you press
control panel to adjust the volume, the
LCD shows the setting you are choosing.
Each key press changes the volume to the
next setting.
WARNING
It is important that you do NOT choose
Permanent unless ALL the users are
hearing-impaired. Otherwise, the default
setting of Amplify may damage the
3
hearing of some users.
d or c on
d or c
d or c on the