Purpose:
To print various types of reports and lists.
The reports are printed in the paper size specified in Printer Settings. The default is A4 or Letter.
Values:
Printer Settings Click the Start (1) button to print the printer settings page.
Device Settings Click the Start (2) button to print the detailed settings page.
Job History
Click the Start (3) button to print the job history report.
Error History
Click the Start (4) button to print the error history report.
Color Test Page Click the Start (5) button to print the color test page.
TCP/IP Settings
Purpose:
To display the current settings of TCP/IP (Transmission Control Protocol/Internet Protocol) protocol.
Values:
IP Address Mode
Displays the settings for the IP address.
IP Address
Displays the printer's IP address.
Subnet Mask
Displays the subnet mask.
Gateway Address Displays the gateway address.
Printer Maintenance
The Printer Maintenance tab includes the System Settings, Paper Density, Adjust BTR, Adjust Fuser, Registration Adjustment, Adjust Altitude, Reset
Defaults, Non-Dell Toner, Initialize PrintMeter, Web Link Customization, TCP/IP Settings, EWS, and Set Password pages.
NOTE:
Values marked by an asterisk (*) are the factory default menu settings.
System Settings
Purpose:
To configure the basic printer settings.
Values:
Power Saver
1-30 min
*1
Timer Mode 1
3 min*
Specifies the amount of time before the printer enters the Power Saver Timer Mode 1 (sleep mode) after a print
job is complete.