Specifying The Original Binding Position ([Binding Position]); Scanning While Removing Dust From The Slit Glass ([Despeckle]); Skipping Blank Pages ([Blank; Splitting The Left And Right Pages Of A Book And Catalog ([Book Original]) - Konica Minolta bizhub c554 User Manual

1

Specifying the original binding position ([Binding Position])

When scanning a double-sided original, specify the binding position of the original in [Binding Position] to
prevent the binding position from being reversed between the front and rear faces.
For details, refer to page 11-20.

Scanning while removing dust from the slit glass ([Despeckle])

When the ADF scans an original, scanning of the original(s) and removal of dust from the Slit Scan Glass are
performed alternately so that the original is always scanned on clean Slit Scan Glass.
It takes longer to finish scanning, compared to the normal operation.
For details, refer to page 11-20.
Skipping blank pages ([Blank Page Removal])
Blank pages contained in the original loaded into the ADF are skipped when the original is scanned.
For details, refer to page 11-20.

Splitting the left and right pages of a book and catalog ([Book Original])

You can scan two-page spreads such as books and catalogs separately into left and right pages, or scan
them as one page. If you place a book or catalog on the Original Glass, you do not need to close the ADF
to scan it.
For details, refer to page 11-25.
1-24
Scan option settings
bizhub C554/C454/C364/C284/C224
1.4