Test Unit Ready Command Descriptor Block-Data Format - Maxtor ATLAS 10K III Product Manual

SCSI Description
The TEST UNIT READY command returns GOOD status if the drive is ready to
receive medium access commands (that is, READ, WRITE, VERIFY, etc.). If the
drive is not ready to receive medium access commands, it returns CHECK
CONDITION status with the appropriate sense keys and qualifiers. The data format
is described in Table 5-209.
T a b l e 5 - 2 0 9 TEST UNIT READY Command Descriptor Block-Data Format
$ K V
$ [ V G
0
1 - 4
5
5-168 Maxtor Atlas 10K III
    
Operation Code (00h)
Reserved
Control