Reassign Blocks Defect Descriptor-Data Format - Maxtor ATLAS 10K III Product Manual

SCSI Description
T a b l e 5 - 1 5 4 REASSIGN BLOCKS Defect Descriptor-Data Format
$ K V
       
$ [ V G
0 - 3 Defect Logical Block Address
The drive returns a CHECK CONDITION status if it cannot complete the
command. If this happens because the drive ran out of spare sectors, the drive sets the
sense key to MEDIUM ERROR and the additional sense code to NO DEFECT
SPARE LOCATION AVAILABLE. The sense key and additional sense key are set
appropriately for any other cause. The Logical Block Address of the first defect
descriptor not reassigned is returned in the command-specific information field of the
sense data. If all defects were reassigned, but some other error occurred, then
FFFFFFFFh is posted in the command-specific field.
Maxtor Atlas 10K III 5-121