Maxtor ATLAS 10K III Product Manual page 111

The Unit Attention Page is used to enable or disable the generation of Unit Attention
Conditions. The Unit Attention Condition Page format and field descriptions are
described in Table 5-62 and Table 5-63 respectively.
T a b l e 5 - 6 2 Unit Attention Condition Page (Page 0)
B i t
 
$ [ V G
0 PS Rsvd
1
2 Reserved
3
T a b l e 5 - 6 3 Unit Attention Condition Page (Page 0)
( K G N F & G H C W N V 8 C N W G
PS 1
DUA 0
 
Page Code (00h)
Page Length (02h)
DUA
Reserved (00h)
& G U E T K R V K Q P
Parameters Savable. This bit is only used with the MODE
SENSE command. A returned value of 1 indicates that the tar-
get is capable of saving the page in a non-volatile, vendor-
specific location. The bit is reserved with the MODE SELECT
command.
Disable Unit Attention. When set to the default value of 0,
the drive reports a CHECK CONDITION for any UNIT ATTEN-
TION condition (power-on, SCSI bus reset, etc.)
SCSI Description
  
Reserved
Maxtor Atlas 10K III

5-47