Release (10) Command Descriptor Block-Data Format - Maxtor ATLAS 10K III Product Manual

The RELEASE and the RESERVE commands are used for contention resolution in
multiple-initiator systems. The RELEASE (10) command is used to release a
previously reserved logical unit. The drive will not return an error if the initiator
attempts to release a reservation that is not currently valid. The data format and field
descriptions are shown in Table 5-163 and Table 5-164 respectively.
T a b l e 5 - 1 6 3 RELEASE (10) Command Descriptor Block-Data Format
$ K V
 
$ [ V G
0
1 Reserved
2
3
4 - 6
7 - 8
9
  
Operation Code (57h)
3rdPty Reserved
Reservation Identification
Third Party Device ID
Reserved
(MSB)
Parameter List Length
(LSB)
Control
SCSI Description
 
LongID Extent
Maxtor Atlas 10K III

5-127