Reserve (6) Command Descriptor Block-Data Format; Reserve (6) Command-Field Descriptions - Maxtor ATLAS 10K III Product Manual

Hide thumbs Also See for ATLAS 10K III:
Table of Contents

Advertisement

The RESERVE and the RELEASE commands are used for contention resolution in
multiple-initiator systems. The RESERVE command is used to reserve a logical unit.
The data format and the field descriptions are described in Table 5-186 and Table 5-
187 respectively.
T a b l e 5 - 1 8 6 RESERVE (6) Command Descriptor Block-Data Format
$ K V

$ [ V G
0
1
2
3 - 4
5
T a b l e 5 - 1 8 7 RESERVE (6) Command-Field Descriptions
( K G N F
3rd Pty
When set to 1, it indicates that the Third Party Device ID field is valid.
Required and used only when the 3rdPty bit is set, in which case this field specifies the
SCSI ID (0 through 7 only) of the initiator to be granted the reservation of the logical unit.
The drive preserves the reservation until one of the following occurs:
• It is superseded by another valid RESERVE command from the initiator.
• It is released by the same initiator
Third
• It is released by a TARGET RESET message from any initiator.
Party
• It is released by a hard reset condition.
Device ID
The drive ignores any attempt to release the reservation made by any other initiator. For
example, if ID7 sends ID2 a Third Party reservation on behalf of ID6 (the target at ID2
gets reserved for the initiator ID6), then only ID7 can release the target at ID2 (using a
Third Party release). ID6 cannot release the reservation even though the reservation was
made on its behalf.
Extent
The drive supports reservations only on entire logical units. The value must be 0.
Reserva-
tion Iden-
Any value in this field is ignored by the drive.
tification
Extent
List
Any value in this field is ignored by the drive.
Length
The drive returns RESERVATION CONFLICT status if the unit is already
N o t e :
reserved for another initiator. Once the reservation is honored, any command
from another initiator (except INQUIRY or REQUEST SENSE) is rejected
with RESERVATION CONFLICT status.


Operation Code (16h)
Reserved
3rdPty
Reservation Identification
Extent List Length
& G U E T K R V K Q P



Third Party Device ID
Control
Maxtor Atlas 10K III
SCSI Description


Extent
5-155

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents