Test Unit Ready Command (00H); Table 5-203 Test Unit Ready Command Descriptor Block-Data Format - Maxtor ATLAS 10K IV User Manual

5.43

TEST UNIT READY Command (00h)

The TEST UNIT READY command returns GOOD status if the drive is ready to
receive medium access commands (that is, READ, WRITE, VERIFY, etc.). If the
drive is not ready to receive medium access commands, it returns CHECK
CONDITION status with the appropriate sense keys and qualifiers. The data format
is described in Table 5-203.
Table 5-203
Bit
Byte
0
1 - 4
5
TEST UNIT READY Command Descriptor Block-Data Format
7 6 5 4 3
Operation Code (00h)
Reserved
Control
Maxtor Atlas 10K IV
SCSI Description
2 1 0
5-135