SCSI Description
The drive collects and stores performance data and error summaries in counters. The
LOG SELECT command is used to zero these counters. The LOG SELECT
command is a complementary command to the LOG SENSE command. The format
of the LOG SELECT CDB and a description of the fields follows in Table 5-42 and
Table 5-43 respectively.
T a b l e 5 - 4 2 LOG SELECT Command Descriptor Block-Data Format
$ K V
$ [ V G
0
1
2
3 – 6
7 – 8
9
T a b l e 5 - 4 3 LOG SELECT Command Descriptor Block-Field Descriptions
5-36
Maxtor Atlas 10K III
Operation Code (4Ch)
Reserved
PC
Parameter List Length
( K G N F
PCR
SP
PC
Parameter
List Length
Reserved
Reserved
Control
& G U E T K R V K Q P
Parameter Code Reset. Must be 1. Causes all
the implemented counters to be set to 0.
Save Parameters. A value of 1 indicates that
certain counters are to be cleared from non-vol-
atile memory.
Page Control. Must be 01b OR 11b.
Must be 0.
PCR
SP