Format Device Page-Field Descriptions - Maxtor ATLAS 10K III Product Manual

T a b l e 5 - 9 5 Format Device Page-Field Descriptions (Page 3)
( K G N F 8 C N W G
PS 0
Tracks/Zone
Alternate
Sectors/Zone
Alternate Tracks/
0
Zone
Alternate Tracks/
Logical Unit
Sectors/Track 579
Data Bytes/
512
Physical Sector
Interleave 1
Track Skew
Factor
Cylinder Skew
Factor
SSEC 0
HSEC 1
RMB 0
SURF 0
Parameters Savable. This bit is only used with the MODE SENSE com-
mand. This bit is reserved with the MODE SELECT command. A PS bit
value of 1 indicates that the disk drive is capable of saving the page in
a non-volatile vendor specific location.
The number of physical tracks per cylinder:
for 18 GB, for 36 GB,
The number of spare locations within a notch:
for 18 GB, for 36 GB,
The drive does not have any alternate tracks.
The number of tracks reserved for defect handling:
for 18 GB, for 36 GB,
The number of Physical Block Address sectors per track. The value de-
pends on the Notch value selected in the Notch and Partitions page.
This value is the current disk sector size.
The drive does not support interleave.
The number of physical sectors between the last logical sector on one
track and the first logical sector on the next track within a cylinder:
25 for 18 GB, 25 for 36 GB, 25 for 73 GB
The number of physical sectors between the last logical sector on one
cylinder and the first logical sector on the next cylinder:
23 for 18 GB, 23 for 36 GB, 23 for 73 GB
The drive does not use soft sector formatting.
The drive supports hard sector formatting only.
The drive does not support removable logical media.
A Surface bit value of 0 indicates that the drive allocates progressive
addresses to all logical blocks within a cylinder prior to allocating ad-
dresses on the next cylinder.
& G U E T K R V K Q P
for 73 GB
for 73 GB
for 73 GB
Maxtor Atlas 10K III
SCSI Description
5-79