21. Lay the relays, ECM connectors and other wiring
aside.
22. Release the two screws securing the seat lock to
the frame, then lay the seat lock (still attached to
its cable) to one side.
1. Seat Lock
2. Screws
23. Release the two screws securing the battery box
assembly to the frame.
,
"'''
....
1. Battery box
2. Screw (left hand shown)
24. Maneouvre the battery box assembly from the
motorcycle and place aside.
Fuel System/Engine Management
25. Noting their orietation, release the three clips
securing the intake plenum to the throttle bodies.
"'
..
1. Throttle bodies
2. Clips
26. Noting their orientation, release the two clips
securing the intake plenum to the intake duct.
1. Intake plenum
2. Intake duct
3. Clips
27. Carefully detach the intake plenum from the
throttle bodies and intake duct. Place the intake
plenum aside.
~.
Service Manual - Rocket III
11.107