Settings For Emergency Recording [Emergency Rec.] - Panasonic WJ-HD616/1000 Installation Manual

Settings for emergency recording [Emergency rec.]
Select the [Emergency rec.] tab on the "Basic" page. (+ Page 60)
The settings relating to emergency recording such as recording duration and recording rate can be configured on this tab. Refer
to Operating Instructions (PDF) for further information about the emergency recording.
[Resolution]
Select the resolution for images to be recorded from the fol-
lowing.
Frame 3D On: High resolution with the motion blur
compensation
Frame 3D Off: High resolution
Field: Standard resolution
Default: Field
[Recording duration]
Specify the recording duration of emergency recording.
The following are available for the recording duration.
2 s/5 s/10 s/20 s/30 s/1 min/3 min/5 min/10 min/30 min
Manual: Recording will continue while the external
switch is being held down. Recording will be per-
formed for at least 8 seconds
Continue: Recording will not stop unless the [ALARM
RESET] button on the front cover of the recorder is
pressed or the [ALM] button in the status display
area is clicked.
Default: 10 s
70
[Rate(ips)]
Select the recording rate for each camera channel.
Default and available values differ depending on the setting
of "Resolution".
When "Off" is selected for a specified camera channel, imag-
es from a camera channel set to "Off" will not be recorded.
• W hen "Frame 3D On" or "Frame 3D Off" is selected
for "Resolution"
Off/ 1.25ips/ 2.5ips/ 3.75ips/ 7.5ips/ 15ips (Only for
HD716K)
Default: 7.5ips (12.5ips for HD716K)
• When "Field" is selected for "Resolution"
Off/ 1.25ips/ 2.5ips/ 3.75ips/ 7.5ips/ 15ips/ 30ips (Only
for HD716K)
Default: 15ips (30ips for HD716K)
[Quality]
The following are available for the image quality.
XF (Extra Fine): Extra fine quality
SF (Super Fine): Super fine quality
FQ (Fine): High quality
NQ (Normal): Standard quality
EX (Extended): Low quality (Recording for a long period
of time)
Default: FQ