Panasonic WJ-HD616/1000 Installation Manual page 17

u Maintenance port
The maintenance port that can be used for connection
with a PC is provided inside the cover. Do not use for
any operation other than maintenance.
i HDD indicator [HDD1 to HDD4]
STS (status): Indicates the operational statuses of the
respective hard disk drive.
Lights green: Indicates that the power of the
respective hard disk drive (formatted) is on.
Blinks green: Indicates that the respective hard disk
drive is for playback use only. (Recording is
unavailable using the respective hard disk drive.)
Blinks orange: Indicates that the respective hard
disk drive is currently being formatted.
Lights red: Indicates that formatting of the respec-
tive hard disk drive has failed.
Off: Indicates that the power of the respective hard
disk drive is off, or that the hard disk drive is not
connected/recognized.
A/F (HDD access/failure): Indicates the status (access/
failure) of the respective hard disk drive.
Blinks green: Indicates that the respective hard disk
drive is being accessed.
Lights red: The respective built-in hard disk drive is
faulty (which can be recovered by replacing the
hard disk drive).
In the RAID 5 mode, it indicates that the respec-
tive hard disk drive is the first faulty drive.
In the RAID 6 mode, it indicates that the respec-
tive hard disk drives are the first and second
faulty drive.
Blinks red: The respective built-in hard disk drive is
faulty (which cannot be recovered even by
replacing the hard disk drive).
In the RAID 5 mode, it indicates that the respec-
tive hard disk drive is the second faulty drive.
In the RAID 6 mode, it indicates that the respec-
tive hard disk drive is the third faulty drive.
Lights red and orange alternately: Indicates that the
respective hard disk drive is currently being
recovered in the RAID 5/RAID 6 mode. (It may
appear that the indicator lights orange when
recovery is being processed at high speed.)
Off: Indicates that the respective hard disk drive is
not being accessed.
Important:
When operating in the RAID5/RAID6 mode and the HDD
indicator lights red, replace the faulty hard disk drive
promptly. Contact your dealer for replacement of hard
disk drives.
In the RAID 5 mode:
When 2 or more HDD indicators light/blink red, it is
impossible to recover data on the faulty hard disk.
In the RAID 6 mode:
When 3 or more HDD indicators light/blink red, it is
impossible to recover data on the faulty hard disk.
o Monitor operation button
[MONITOR] button: Press this button to change the
monitor to be operated. The monitor number will
light to indicate the monitor currently being selected.
[SEQ] button: Press this button to start/stop the
sequence.
Lights green: During sequence display
[OSD] button: Press this button to display/hide informa-
tion such as the camera title.
[MULTI SCREEN] button: Every pressing this button to
change the display pattern of multi-screen.
!0 Playback control function button
[GOTO LAST] button: Press this button to jump the
playback point to the top of the latest recorded
image.
[GOTO DATE] button: Press this button to designate
time and date of recorded images to be played.
[SEARCH] button: Press this button to play recorded
images after searching recording events.
Lights green: During search playback
[COPY] button: Press this button to display the menu on
which it is possible to copy recorded images onto a
DVD (when using an optional DVD drive) or a SDHC/
SD memory card. (+ Operating Instructions (PDF))
!1 [SUB MENU] button
Press this button to display the submenu used for cam-
era operation and the electronic zoom.
(+ Operating Instructions (PDF))
!2 Menu operation button
Arrows button: Use this button to move the cursor on
the setup menu, the search menu, etc.
[SETUP/ESC] button: Hold down this button to display
the setup menu. When the setup menu is being dis-
played, press this button to go back to the previous
page.
[SET] button: Press this button to determine the edited
settings on the setup menu.
This button also can be used to turn the alarm sus-
pension on/off. (+ Operating Instructions (PDF))
!3 Mouse connection port [MOUSE]
Use this port to connect a USB mouse (commercially
available). (No device other than a mouse can be con-
nected.)
* It is impossible to connect a mouse to the mouse con-
nection port if the connector from the mouse is upside
down. When it is hard to connect, check the upside
down position of the connector from the mouse.
!4 SDHC/SD memory card slot/External output con-
nector (AUDIO OUT, VIDEO OUT)
The video output connector (RCA pin jack) to be used
for output to a VCR, audio output connector (RCA pin
jack) and SDHC/SD memory card slot are provided
inside the cover.
!5 Built-in DVD
It is possible to install an optional built-in DVD
(WJ-HDB611).
17