Table of Contents
Advertisement
Configure the basic settings of the recorder [Basic]
The basic settings of the recorder such as time & date, recording actions and audio, etc. and the settings relating to the emer-
gency recording can be configured on the "Basic setup" page.
The "Basic" page has [Basic], [Time & date], [Recording], [Audio] and [Emergency rec.] tabs.
Configure the settings relating to the basic operation of recorder [Basic]
Select the [Basic] tab on the "Basic" page. (+ Page 60)
The settings such as the language and the time to be skipped to when the [GO TO LAST] button is pressed can be configured
on this tab.
[Language]
Select a display language for the web browser.
Japanese, English, Français, Español, Deutsch, Italiano,
Russian
Default: English
[Go to last before]
Select the time to be skipped to when the [GOTO LAST]
button is pressed during playback from the following.
5s/10s/30s/1min/5min (before the start time of the latest
recorded image)
Default: 30s
[Buzzer]
Configure the settings for sounding a buzzer at an error
occurrence.
Off: A buzzer will not sound at an error occurrence.
2s (default)/5s/10s/20s/30s/1min: The buzzer that
started sounding at an error occurrence will sound
for the selected period.
Ext: The buzzer that started sounding at an error occur-
rence will keep on sounding until the [ALARM
RESET] button on the front panel of the recording is
pressed or the error icon in the status display area is
clicked.
Default: 2s
[Safe shutdown time]
Select a wait time for the shutdown process to start after an
outage detection signal is provided to the recorder.
10s/20s/30s/1min/2min/3min/4min/5min
Default: 10s
65
Hide quick links:
Advertisement
Table of Contents
