Dv Automatic Recording (Dv Auto Rec); Transferring (Dubbing) Still Pictures; Transferring (Dubbing) Using The Transferring (Dubbing) List - Panasonic DMR-E500H Operating Instructions Manual

Recording from a video cassette recorder
Refer to the control reference on page 51.

DV automatic recording (DV AUTO REC)

[HDD] [RAM]
When the "DV AUTO REC" function is used, programmes are
recorded as a title while at the same time chapters are created at
each break in the images and the play list is created automatically.
Preparation
1 Turn off the main unit and DV equipment, then connect the
equipment with the unit's DV input terminal (➡ page 51).
2 Turn on the main unit and DV equipment.
3 Pause play of the DV equipment at the point you want recording
to start.
4 Press [HDD] or [DVD] to select the recording drive.
≥When the output signal from the external equipment is NTSC,
change the "TV System" to "NTSC" in the SETUP menu (➡page 67).
1
While stopped
Press [FUNCTIONS].
2
Press [3, 4, 2, 1] to select "DV
AUTO REC" and press [ENTER].
3
Press [REC MODE] to select the
recording mode.
4
Press [2, 1] to select "Rec" and
press [ENTER].
Recording starts.
When recording finishes
The confirmation screen appears. Press [ENTER] to finish DV
automatic recording.
To stop recording
Press [∫].
[Note]
≥Only one piece of DV equipment (e.g., digital video camcorder) can
be connected to the unit via the DV input terminal.
≥It is not possible to operate the unit from the connected DV equipment.
≥The DV input on this unit is for use with DV equipment only. (It
cannot be connected to a computer, etc.)
≥The DV equipment name may not be shown correctly.
≥Depending on the DV equipment, the images or audio may not be
input properly.
≥The date and time information on the tape of the DV equipment will
not be recorded.
≥You cannot record and play simultaneously.
≥Even if you set the simultaneous MPEG4 recording function
(➡page 24), MPEG4 recording will not take place.
If the DV automatic recording function does not work properly,
check the connections and DV equipment settings, and turn the
unit off and back on.
If that does not work, follow the instructions for manual
recording (➡ page 51).
RQT7751
52
52

Transferring (dubbing) still pictures

HDD DVD
1 2
4 5
7 8
CANCEL
0
SKIP
:, 9
STOP PAUSE
DIRECT NAVIGATOR
TOP MENU
3,4,2,1
ENTER
ENTER
SUB MENU
SUB MENU
[HDD] [RAM] [SD] [PC]
Transferring (dubbing) using the
transferring (dubbing) list
1
While stopped
Press [FUNCTIONS].
2
Press [3, 4, 2, 1] to select
"DUBBING" and press [ENTER].
DUBBING
Select the dubbing direction.
Cancel All
Source SD CARD
1
Dubbing Direction
SD CARD > HDD
Destination HDD
2
Dubbing Mode
PICTURE High Speed
3
Create List 0
≥If you are not going to change the registered list press [4]
several times (➡page 53, step 7).
3
Press [3, 4] to select "Dubbing
Direction" and press [1].
1 Press [3, 4] to select "Source" and press [ENTER].
2 Press [3, 4] to select the drive and press [ENTER].
3 Press [3, 4] to select "Destination" and press
[ENTER].
4 Press [3, 4] to select the drive and press [ENTER].
The same drive as the transfer (dubbing) source can be
selected.
5 Press [2] to confirm.
4
Press [3, 4] to select "Dubbing
Mode" and press [1].
1 Press [3, 4] to select "Format" and press [ENTER].
2 Press [3, 4] to select "PICTURE" and press [ENTER].
"Recording Mode" is automatically set to "High Speed".
3 Press [2] to confirm.
5
Press [3, 4] to select "Create List"
and press [1].
Select the transferring (dubbing) items and register on the list.
Still pictures and folders cannot be registered on the same list.
DUBBING
Create dubbing list.
Picture/Folder Picture
Cancel All
Destination Capacity: 4343MB
1
Dubbing Direction
No. Size Name of item
SD CARD > HDD
New item
2
Dubbing Mode
PICTURE High Speed
3
Create List
Previous
Start Dubbing Set
ENTER
RETURN
∫ To register individual still pictures
1 Press [3, 4] to select "New item" and press [ENTER].
2 Press [3, 4, 2, 1] to select the still picture and press
[ENTER].
≥To select a multiple number of items together, press [;]
to add the check mark and press [ENTER] (➡page 53,
Multiple editing).
≥To show other pages (➡ page 53)
≥To select the still pictures in another folder (➡ page 53)
≥To edit the transferring (dubbing) list (➡page 53)
SD/PC
SD/PC
3
CH
6
ShowView
9
INPUT SELECT
MANUAL SKIP
SLOW/SEARCH
PLAY/x1.3
;
FUNCTIONS
FUNCTIONS
RETURN
RETURN
Next
01/01