Functions For The Emergency Recording [Emergency Rec] - Panasonic WJ-ND200 Setup Instructions

Functions for the emergency recording [Emergency REC]

Perform the settings for the emergency recording.
Settings for emergency recording [Emergency REC]
Perform the settings for emergency recording such as the recording time or recording rate. Refer to the provided
installation guide (book) for further information about emergency recording.
Screenshot 1
Click the [Emergency REC] button to display the
"Emergency REC" page.
Setup items
I Recording Duration
Perform the settings for emergency recording such as
the recording duration or recording operations.
The following are available for the recording duration.
2 s/5 s/10 s/20 s/30 s/1 min/3 min/5 min/10 min/30 min
MANUAL: Recording will continue during the emer-
gency recording input is being supplied.
CONTINUE: Recording will not stop until the [ALM] but-
ton is clicked.
Note:
When "MANUAL" is selected, recording will be per-
formed for at least 8 seconds.
34
Step 1
Perform the settings for each item.
Refer to the following for further information about the
settings for each item.
Step 2
Click the [SET] button after completing the settings.
Important:
Recording will not be performed for around 4 sec-
onds just after the emergency recording.
I Recording Rate
RECORDER SETUP
Perform the settings for emergency recording for each
camera channel such as the recording rate.
The following are available for "Recording Rate". When
"OFF" is selected for a specified camera channel,
images from a camera channel set to "OFF" will not be
recorded.
OFF/1 ips/2 ips/3 ips/5 ips/10 ips/15 ips/ALL/I-Frame
Note:
The available value differs depending on the select-
ed image compression method. The compression
method can be set on the "MODEL/COMPRES-
SION" setting of the setup menu ("Camera" – "NW
Camera Setup" – "MODEL/COMPRESSION").