Configure The Settings Relating To Network Transmission [Transmission] - Panasonic WJ-HD616/1000 Installation Manual

Configure the settings relating to network transmission [Transmission]
Select the [Transmission] tab on the "Network" page. (+ Page 60)
The settings relating to the resolution and rate to transmit live images to a PC via a network can also be configured on this tab.
[Live video resolution]
Select the resolution for live images from the following.
REC resolution: Live images are transmitted with the
resolution applied at the time of recording.
QVGA: Live images are transmitted in the QVGA size.
Default: REC resolution:
[Live video rate(rec resolution)]
Select the image transmission rate of live images (activated
when recording is not performed) when "REC resolution" is
selected for "Live video resolution". During recording, record-
ing rate is activated for live image transmission.
Off/ 1.25ips/ 2.5ips/ 3.75ips/ 7.5ips/ 15ips (Only for
HD716K)
Default: 7.5ips
[Live video quality(rec resolution)]
Select the image quality of live images (activated when
recording is not performed) when "REC resolution" is select-
ed for "Live video resolution". During recording, recording
image quality is activated for live image transmission.
XF (Extra Fine): Extra quality
SF (Super Fine): Super high quality
FQ (Fine): High quality
NQ (Normal): Standard quality
EX (Extended): Low quality (for long recording)
Default: FQ
[Live video rate(QVGA)]
Select the transmission bit rate when "QVGA" is selected for
"Live video resolution".
128Kbps/192Kbps/256Kbps/384Kbps*/512Kbps*
* Only for HD716K
Default: 256Kbps
[Bandwidth control]
Select the maximum transmission rate for data to be trans-
mitted from the following.
Unlimited/512Kbps/1 024Kbps/2Mbps/3Mbps/5Mbps/
8Mbps
Default: Unlimited
Note:
• Regardless of the setting for "Live video resolution",
when images are displayed on a multiscreen (4-split/
9-split/16-split screen) or with the sequential display,
"QVGA" is activated for resolution, and the setting for
"Live video rate (QVGA)" is activated when image is
transmitted.
• When image is displayed on a single screen, the setting
for "Live video resolution" is activated when image is
transmitted.
• The settings for "Live video rate(rec resolution)", "Live
video quality(rec resolution)" and "Live video rate(QVGA)"
are applied to each screen segment.
Example: When "128Kbps" is selected for "Live video
rate (QVGA)" while images are being displayed on a
4-split screen, the whole transmission rate is
512 Kbps.
• Select the setting for "Bandwidth control" so that the
value is greater than the total rate required for network
transmission. When the setting value is less than the
total transmission rate, image data may be destroyed
during transmission.
Example: When "QVGA" is selected for "Live video res-
olution" and "128Kbps" is selected for "Live video
rate (QVGA)" while 4 PCs displaying a single screen
are accessing the recorder simultaneously, select the
value greater than "512Kbps" for "Bandwidth con-
trol".
When "REC resolution" is selected for "Live video resolu-
tion", it is recommended to set "Unlimited" for
"Bandwidth control" to prevent the images from destruc-
tion due to change in transmission rate caused by the
recording setting. When images are destroyed even
when "Unlimited" is selected for "Bandwidth control",
select a lower value for image quality or recording rate.
105