Panasonic WJ-HD616/1000 Installation Manual page 120

[Recording information]
When the [Display] button is selected, the "Recording infor-
mation" page will be displayed, and the disk capacity and
the available capacity of each hard disk drive, the hour meter
and the time range of the images recorded on each hard
disk drive will be displayed.
There are 2 setup pages. To move to another page, select
the [<] or [>] button.
Note:
• Information is displayed on "HDD1" in the RAID5 or
RAID6 mode.
[Main] button/[Ext.1] - [Ext.3] buttons
Select a button to determine the disk (the recorder (main)/
extension unit) of which recording information is to be dis-
played.
• Capacity
Displays the capacity of the hard disk drive.
• Remain capacity
Displays the remaining capacity of the hard disk drive.
Note:
• The displayed remaining capacity will not include the
space required for data management. Therefore, the
understated remaining capacity will be displayed.
Therefore, the understated remaining capacity will be
displayed.
• The capacity remaining for the pre-event recording area
is not shown.
120
• Hour meter
Displays the operating time of the hard disk drive.
• Recorded time range
The time range of the images recorded will be displayed.
Note:
• The time range of the images for the pre-event recording
area is not displayed.
• [Back] button
Closes the "Recording information" page and returns to
the [Disk information] tab.
[Total capacity]
Displays the total capacity of all recording areas and opera-
tion modes (single mode/RAID5 mode/RAID6 mode) of hard
disk drives.
• [NML rec.]
Displays the total capacity of manual recording areas
and schedule recording areas.
• [EVT rec.]
Displays the total capacity of emergency recording areas
and post-event recording areas.
• [Pre-EVT rec.]
Displays the total capacity of pre-event recording areas.
• [Undefined]
Displays the total capacity of the spaces not assigned to
any recording areas.
Note:
• Operation modes of hard disk drives are displayed sepa-
rately on the web browser.
[Disk information]
Displays the capacity of the hard disk drives on the recorder
or the extension units and the recording area type.
Normal: Set for the normal recording area
Event: Set for the event recording area
Pre-event: Set for the pre-event recording area
Remove: Hard disk drives that are excluded from oper-
ation due to fault
Error: Hard disk drives that have become faulty during
the format process
N-Used: Set for the normal recording area of another
HD616K / HD716K (Recording is impossible, but
playback is possible.)
E-Used: Set for the event recording area of another
HD616K / HD716K (Recording is impossible, but
playback is possible.)
P-Used: Set for the pre-event recording area of another
HD616K / HD716K (Recording is impossible, but
playback is possible.)
* "(R)" indicates the hard disk drives that are designated to
the subject for recording.