Recording From A Video Cassette Recorder; Manual Recording; Dv Automatic Recording (Dv Auto Rec) - Panasonic DMR-E65 Operating Instructions Manual

Recording from a video cassette recorder

DVD
TV
DIRECT TV REC
AV
DVD
DVD
DRIVE SELECT
1 2
4 5
7 8
CANCEL
0
SKIP
STOP
∫
DIRECT NAVIGATOR
TOP MENU
3,4,2,1
ENTER
SUB MENU
PROG/CHECK
DISPLAY
TIMER ERASE
REC MODE F
e.g., Connecting other video equipment to the AV3 or DV input
terminals
≥Turn off the unit and other video equipment before connecting.
This unit
SD CARD PC CARD EJECT
AV3 S-VIDEO IN VIDEO IN L/MONO AUDIO IN R DV IN
S-VIDEO IN VIDEO IN L/MONO - AUDIO IN - R
Yellow White Red
Audio/
S-Video
Video cable
§
cable
If the audio output of the other equipment is monaural, connect to L/MONO.
§
The S-VIDEO terminal achieves a more vivid picture than the
VIDEO terminal.
When recording from the unit's DV terminal
Select the type of audio recording from "Audio Mode for DV Input" in
the SETUP menu ( page 43).

Manual recording

[RAM] [DVD-R]
Preparation
≥Connect a video cassette recorder to this unit's input terminals.
≥Press [DVD] to select the DVD drive.
≥When recording bilingual programmes
[RAM]
When both M 1 and M 2 is selected on the connected equipment,
you can select the audio type in playback.
[DVD-R]
Select either M 1 or M 2 on the connected equipment. (You cannot
select the audio type in playback.)
≥When the output signal from the external equipment is NTSC,
change the "TV System" to "NTSC" in the SETUP menu ( page 46).
≥To reduce noise in input from a video cassette recorder, set "AV-in
NR" to "On" in the SETUP menu ( page 42).
1
While stopped
Press [INPUT SELECT] to select the
input channel for the equipment you
have connected.
e.g., If you have connected to AV3 input terminals, select "AV3".
VOLUME
CH
SD/PC
3
CH
6
ShowView
9
INPUT SELECT
MANUAL SKIP
INPUT SELECT
SLOW/SEARCH
PAUSE PLAY/x1.3
;
FUNCTIONS
FUNCTIONS
ENTER
RETURN
STATUS TIME SLIP
REC MODE REC
¥ REC
CREATE
OPEN/CLOSE
REC
TIME SLIP DVD SD PC DRIVE SELECT / x 1.3
TIME SLIP CH
DV IN
DV cable
(IEEE 1394, 4-pin)
Other video
equipment
2
Press [REC MODE] to select the
recording mode.
3
Start play on the other equipment.
4
Press [¥ REC].
Recording starts.
To skip unwanted parts
Press [;] to pause recording. (Press again to restart recording.)
To stop recording
Press [∫].
To record programmes to fill up the remaining space on the
disc
page 18, Flexible Recording
Almost all videos and DVD software on sale have been
treated to prevent illegal copying. Any software that has
been so treated cannot be recorded using this unit.

DV automatic recording (DV AUTO REC)

[RAM]
When the "DV AUTO REC" function is used, programmes are
recorded as a title while at the same time chapters are created at
each break in the images and the play list is created automatically.
Preparation
1 Turn off the main unit and DV equipment, then connect the
equipment with the unit's DV input terminal ( left).
2 Turn on the main unit and DV equipment.
3 Pause play of the DV equipment at the point you want recording
to start.
4 Press [DVD] to select the DVD drive.
≥When the output signal from the external equipment is NTSC,
change the "TV System" to "NTSC" in the SETUP menu ( page 46).
1
While stopped
Press [FUNCTIONS].
2
Press [3, 4, 2, 1] to select "DV
AUTO REC" and press [ENTER].
3
Press [REC MODE] to select the
recording mode.
4
Press [2, 1] to select "Rec" and
press [ENTER].
Recording starts.
When recording finishes
The confirmation screen appears. Press [ENTER] to finish DV
automatic recording.
To stop recording
Press [∫].
[Note]
≥Only one piece of DV equipment (e.g., digital video camcorder) can
be connected to the unit via the DV input terminal.
≥It is not possible to operate the unit from the connected DV
equipment.
≥The DV input on this unit is for use with DV equipment only. (It
cannot be connected to a computer, etc.)
≥The DV equipment name may not be shown correctly.
≥Depending on the DV equipment, the images or audio may not be
input properly.
≥The date and time information on the tape of the DV equipment will
not be recorded.
≥You cannot record and play simultaneously.
If the DV automatic recording function does not work properly,
check the connections and DV equipment settings, and turn the
unit off and back on.
If that does not work, follow the instructions for manual
recording ( left).
RQT7542
35
35