Connection Of A Vcr - Panasonic WJ-HD616/1000 Installation Manual

Connection of a VCR
When copying images recorded on the recorder to a VCR, connect cables from a VCR to the video output connector and the
audio connector inside the SDHC/SD memory card slot cover at the front of the recorder.
AUDIO
IN
Audio cable with plugs
(locally procured)
Note:
• The same images displayed on Monitor 2 will be output from the video output connector on the front of the recorder (except
when another recorder is connected in cascading connection).The audio output connectors on the front and rear are
designed to output the same audio.
• When connecting multiple recorders in cascading connection, it is impossible to output video signals of another
WJ-HD616K/WJ-HD716K from the video output connector. Connect VCRs to each recorder (WJ-HD616K/WJ-HD716K).
34
VCR
VIDEO
IN
Video cable with plugs
(locally procured)
ALARM
RESET
ERROR ALARM
MONITOR
ALARM
SEQ
SUSPEND STS A/F
HDD 1
TIMER HDD 2
OSD
HDD 3
MULTI SCREEN
OPERATE
HDD 4
AUDIO VIDEO
OUT
OUT
Open the SDHC/SD memory card slot.
Recorder
STOP PLAY PAUSE REC REC STOP
1 2 3 4
GOTO LAST GOTO DATE SEARCH COPY
5 6 7 8
SETUP /ESC
9 0/10 11 12
SUB
MENU SET HOLD
13 14 15 16
Digital Disk Recorder WJ-HD616
REV FWD
MOUSE