File Transfer Between The Unit And Your Computer; Connecting A Computer To The Unit - Fostex UR-2 Owner's Manual

Stereo rack memory recorder
Hide thumbs Also See for UR-2:
Table of Contents

Advertisement

File transfer between the unit and your computer

By connecting the [USB-PC] connector of the unit to a computer, you can transfer an audio file (BWF
file) recorded on an SD card using the unit to the computer.
An audio file recorded to an SD card using the UR-2 can be copied to a hard disk drive in a computer, or
import to a computer software application such as Digidesign Pro Tools. This connection is also used
when transferring an upgraded software downloaded from the Fostex website to the unit.
<Note>:
You can only transfer an audio file recorded on an SD card set to the SD1 or SD2 slot.
A computer connected to the unit must support either of Windows ME, 2000, XP, vista, or
<Note>:
Macintosh OS X. Check that your computer supports either of these operating systems.
* All company names and model names mentioned in this manual are trademarks or registered trademarks of their respective
holders.
After connecting the unit and a computer using a USB cable, set the "USB to PC" menu of the MENU
mode appropriately.
In the following procedure example, it is assumed that the unit is connected to a Windows XP computer.
(1)
Turn on both the computer and the unit.
(2)
While the unit is stopped, press the [ENTER]
key to enter the MENU mode.
(3)
Use the [MENU] dial to highlight "USB to PC"
and press the [ENTER] key.
The display now shows the screen for
confirming USB connection.
Model UR-2 <File transfer between the unit and your computer>
When a USB memory is set to the [USB HOST] port, you
<Note>:
cannot connect a computer to the [USB PC] port.
When you attempt to connect a computer to the unit, remove the
USB memory.
POWER

Connecting a computer to the unit

-65-
PHONES
USB
PC
USB
HOST
(KYBD ONLY)
SD-1
MIN
MAX
[USB PC] port
(4)
Press the [ENTER] key.
USB connection is established and the display
now shows the following screen.
You can transfer data between the unit and
the computer while the screen above is
shown.
PLAY
SHIFT
MODE
TIME
AUTO PLAY
EDIT
REPEAT
EJECT
READY
FILE SEL
DISPLAY
SD-2
STE
STRG SEL
Flashing

Advertisement

Table of Contents
loading

Table of Contents