New Procedure For File Copy - Fostex UR-2 Supplementary Manual

With the newly added folder creation capability described earlier, the procedure for file copy is partly changed.
Follow the procedure described below for file copy with the new version. (The procedure for file copy with the
previous version is described on page 84 of the owner's manual.)
The following shows the procedure for copying files from an SD card in the SD-1 slot to a USB memory.
<Note>: If more than one folder exists on the current
storage device, select an appropriate folder that stores
a file you want to copy before performing the follow-
ing procedure. See "Selecting a folder" for details about
how to select a folder.
1) While the unit is stopped, press the [ENTER] key to
enter the MENU mode.
When you first enter the MENU mode, the
following screen is shown.
(2) Use the [MENU] dial to highlight "STORAGE UTILITY"
and press the [ENTER] key.
The display now shows the menu items of the
STORAGE UTILITY menu.
(3) Use the [MENU] dial to highlight "File copy" and press
the [ENTER] key.
The display shows the file list in the selected folder
on the current storage device.
(4) Use the [MENU] dial to highlight a copy source file and
press the [ENTER] key.
A checkmark is added to the left of the selected
file. By repeating this step, you can add checkmarks
to multiple files.

New procedure for file copy

7
<Memo>: Pressing the [
first entry in the list, while pressing the [
key highlights the last entry in the list.
<Memo>: By highlighting "<All Select>" at the top
of the file list and pressing the [ENTER] key, you
can add checkmarks to all the files. The screen
changes as below.
<Note>: If you want to copy all files in the chain
play list (CHAINLIST.CSV) or in the timer play
list (TIMERLIST.CSV) created on the copy
source storage device, it is recommended to
select "<All Select>".
(5) Use the [MENU] dial to highlight "Destination" and press
the [ENTER] key.
You can now select the copy destination.
(6) Use the [MENU] dial to select "USB" and press the
[ENTER] key.
] key highlights the
]