Selecting Stereo Or Mono Recording Mode; Setting The Maximum File Length - Fostex UR-2 Owner's Manual

Selecting stereo or mono recording mode

You can select stereo or mono recording mode.
The setting is stored to the internal flash ROM.
By using the [MENU] dial to highlight "Record
CH." in the SYSTEM SETUP menu and pressing
the [ENTER] key, the current setting starts flash-
ing and you can now select stereo or mono (the
default setting is "Stereo").
Use the [MENU] dial to select the desired option
and press the [ENTER] key to confirm the set-
ting.
To exit the [MENU] mode, press the [STOP] key
(or the [EXIT] key).
Depending on the selection, the Home
<Memo>:
screen looks like below.
<When "Stereo" is selected (default)>
<When "Mono" is selected>
Model UR-2 <MENU mode / SYSTEM SETUP menu>
Flashing
-75-

Setting the maximum file length

You can select the maximum length (capacity)
for recording.
When you import a file to a computer, the maxi-
mum file length may be limited by the computer.
Therefore you should set the maximum length
of a file recorded by the unit appropriately.
The maximum length of a file recorded by the
unit can be set to 4 GB (default) or 2 GB.
The setting is stored to the internal flash ROM.
By using the [MENU] dial to highlight "Max. file
length" in the SYSTEM SETUP menu and pressing
the [ENTER] key, the current setting starts flash-
ing and you can now select the maximum length
of a file (the default setting is "4G").
When you use a storage device whose
<Note>:
recording capacity is smaller than the setting
above, the maximum file length is limited by the
capacity of the device.
To exit the [MENU] mode, press the [STOP] key
(or the [EXIT] key).
Flashing