Playback In Timer Play Mode; Creating The Chain Play List - Fostex UR-2 Owner's Manual

Model UR-2 <Playback>

Creating the chain play list

To execute the CHAIN SINGLE, CHAIN ALL or
MEMORY play, the chain play list must be cre-
ated.
The created chain play list is stored in the cur-
rent folder in the current storage device. In the
following procedure, it is assumed that the folder
in which you make the chain play list is open
and files are stored in the folder.
<Memo>: You can set up to 250 files on the chain
play list.
The files set in the list numbers from 001 to 010
are used for the MEMORY play.
(1) While the unit is stopped, press the [ENTER]
key to enter the MENU mode.
(2) Use the [MENU] dial to highlight "CHAIN PLAY
SET" and press the [ENTER] key.
The display shows the screen for selecting the
list number. In the screen, the following items
are shown.
The total time of files set in the
TOTAL TIME
list.
[LN]
[FN] [NAME]
<SAVE>
<ALL CLEAR>
The list number is shown below.
The file number and name of a
file which is set.
When you save the list created,
select this item.
When you clear the list created,
select this item.
(3) While "001" is highlighted, press the [ENTER]
key.
You can now select a file you want to set to
list number 001.
(4) Use the [MENU] dial to highlight a desired file
and press the [ENTER] key.
If you select file 003, it is set to list number
001, and the display again shows the screen
for selecting the list number.
(5) Use the [MENU] dial to highlight "002" and press
the [ENTER] key.
You can now select a file you want to set to
list number 002.
(6) Use the [MENU] dial to highlight a desired file
and press the [ENTER] key.
The selected file is set to list number 002,
and the display again shows the screen for
selecting the list number.
(7) Repeat the steps (5) and (6) above to set files
as many times as required.
In the screen example below, files are set from
list number 001 to list number 010.
-46-