Editing The Timer Play List; Changing A File - Fostex UR-2 Owner's Manual

Model UR-2 <Playback>
Up to 250 file can be set to the list.
To add a file to the list, highlight "002" and
press the [ENTER] key, then follow the same
procedure as above.
<Memo>: By highlighting "<ALL CLEAR>"
and pressing the [ENTER] key, all file en-
tries are cleared. You can create the timer
play list from the start.
(9) Use the [MENU] dial to highlight "<SAVE>" and
press the [ENTER] key.
The confirmation screen as below appears.
If you press the [ENTER] key again, the list will
be saved as "TIMERLIST.CSV" with the CSV
(Comma Separated Value) file format in which
each value is separated by comma (see page
88).
(10) Press the [ENTER] key again to execute saving.
The display returns to the Home screen which
was shown before the unit entered the menu
mode. (To cancel saving the list, press the [EXIT]
key.)
When you select the TIMER play
<Memo>:
mode while the timer play list is created,
the unit reads the timer play list and the
display shows the Home screen as below.
On the Home screen, you can see that the
unit will play back the file "SCENE_002.wav."
at 8:30 on Monday by the timer play func-
tion. At the bottom, the current date, days
of the week and time are shown.

Editing the timer play list

You can edit the timer play list.
The following editing items are available.
1) Changing the file to be played back
2) Editing the time and the days of the week for
playback.
3) Editing the start and end points of a file
using the time edit function.
4) Replacing the start or end point with a CUE
time.
(1) While the unit is stopped, press the [ENTER]
key to enter the MENU mode.
(2) Use the [MENU] dial to highlight "TIMER PLAY
SET" and press the [ENTER] key.
The timer play list is shown.
Flashing
(3) "Use the [MENU] dial to highlight the desired
file number [FNO] and press the [ENTER] key."
The display shows the setting screen for the
selected file. You can now edit the current
setting.

• Changing a File

(1) While "FNO" is highlighted, press the [ENTER] key.
The display shows the screen for selecting a file.
(2) Use the [MENU] dial to highlight the desired file
and press the [ENTER] key.
The file to be played back is replaced with the
selected file.
(3) Execute the save operation in the same manner
as described on page 50.
-52-