Editing The Chain Play List; Editing A Point Using The Time Edit Function - Fostex UR-2 Owner's Manual

Stereo rack memory recorder
Hide thumbs Also See for UR-2:
Table of Contents

Advertisement

When you set a file to the list,
<Memo>:
all audio data (from ABS 0 to REC END) is
set as the playback area. However, you
can specify the start and (or) end points
if required (see the next section, "Editing
the list").
<Memo>:
By using the [MENU] dial to
highlight "<ALL CLEAR>" at the bottom
of the screen and pressing the [ENTER]
key, all the files in the list are cleared and
the screen returns to the initial condition
before you set files.
(8)
Use the [MENU] dial to highlight "<SAVE>" and
press the [ENTER] key.
The display changes to show the screen for
saving the play list named "CHAINLIST.CSV",
on which "?" flashes.
(9)
Press the [ENTER] key to save the list.
After the unit finishes saving the list, the
display returns to the Home screen.
<Memo>:
The play list is saved to the folder
in the current storage device as the
"CHAINLIST.CSV" file in the CSV (Comma
Separated Value) format. (The list is over-
written.) See page 88.

Editing the chain play list

You can edit the chain play list.
The following editing items are available.
1) Editing the start and end points of a file
using the time edit function.
2) Replacing the start or end point with a CUE
time.
3) Fine-adjusting the start or end point using the
digital scrub function.
4) Inserting a file to the chain play list.
5) Deleting a file from the chain play list.
In the following description, it is assumed that
the chain play list as the table below is created.
List number File number
001
002
003
004
005
006
007
008
009
010

Editing a point using the time edit function

The following description shows the procedure
example of editing the start and end points of
file number 008 which is set to list number 002
using the time edit function.
1)
While the unit is stopped, press the [ENTER]
key to enter the MENU mode.
2)
Use the [MENU] dial to highlight "CHAIN PLAY
SET" and press the [ENTER] key.
The chain play list is shown.
-47-
Model UR-2 <Playback>
File name
003
SCENE_003
008
SCENE_008
SCENE_001
001
007
SCENE_007
006
SCENE_006
004
SCENE_004
005
SCENE_005
002
SCENE_002
009
SCENE_009
010
SCENE_010

Advertisement

Table of Contents
loading

Table of Contents