Inserting A Storage Device - Fostex UR-2 Owner's Manual

Model UR-2 <Preparation>

Inserting a storage device

To insert a storage device, loosen the fixing screw
and open the protection cover for the slots (you
can remove the cover by opening it approxi-
mately 45 degrees and pulling it up).
PC USB HOST
SD-1
Fixing screw
You can insert up to three storage devices into the
slots/ports: two SD (SDHS) cards to the [SD-1] and
[SD-2] slots and a USB memory to the [USB HOST]
port. If you insert more than one storage device
after turning on the power, the first device you in-
sert is selected as the current storage device.
PC USB HOST
USB memory
<Memo>: The protection cover can be closed even
when both the [SD-1] and [SD-2] slots are occu-
pied.
<Note>: See "Changing the current storage device"
described on page 28 for details about how to
change the current storage device when more
than one device is inserted.
<Memo>: When you turn on the power with more
than one storage device inserted, the following
device is selected as the current storage device
preferentially.
Storage device inserted
SHIFT
AUTO PLAY
EJECT
F
READY
SD-1 SD-2
SD-2
S
SHIFT
AUTO PLAY
EJECT
READY
SD-1 SD-2
SD (SDHC) card
The storage device
selected as the current
storage device
preferentially
SD card on the [SD-1] slot
SD card on the [SD-1] slot
SD card on the [SD-2] slot
SD card on the [SD-1] slot
For example, when an unrecorded SD card is in-
serted, the unit turns on the [SD-1] indicator in green
and brings up the following screen after reading
the card information.
PC USB
)
"A" is added to the beginning of a file number. This
means the SD card on the [SD-1] slot is now selected
as the current storage device.
You can also see the file format, FD/bit and play
mode under the file number. On the screen example
below, they are "
When the SD card on the [SD-2] slot or USB memory
is selected as the current storage, the appropriate
alphabetical character is added to the beginning of
a file number, as shown below.
The current
storage device is
SD-2
The current
storage device is
USB
<Memo>: When the unit is turned on while the
current storage device has one or more recorded
files, it stops at the beginning of the first recorded
file.
You can automatically start playback after turn-
ing on the power when a recorded storage de-
vice is inserted to the slot/port (see page 58).
When the unit is turned on while the current stor-
age device has any folder other than the BWFF
folder, the display shows the screen for selecting
a folder (see pages 28 and 29).
-26-
HOST
EJECT
READY
SD-1 SD-2
Lit
", " " and " ".